IntellaView Blades
Product information
The APCON IntellaView platform consists of the ACI-4030-E36 and ACI-4030-E52 multi-function blades, the IntellaView Optical Bypass TAP, and the ACI-4033-E00 HyperEngine Packet Processor blade.
The ACI-4030-E52 blade is a highly flexible Packet Aggregation switch that includes the following port and density options:
- 48 SFP+ ports capable of supporting 1G, 10G, or 25G.
- 4 QSFP28 ports capable of supporting 40G or 100G.
- The QSFP28 ports support port breakout. Port breakout breaks a 40G port into 4 × 10Gbps ports or a 100G port into 4 × 25Gbps ports using breakout cables
Learn about our industry-leading support program
Product features and specifications
Features
Supports 1G / 10G / 25G / 40G / 100G speeds
Packet processing, Packet Slicing, Protocol (Header) Stripping supported at full line rate on every port
Tunnel Initiation / Termination
Access Control Lists (ACLs) to filter traffic
Easily direct traffic of interest to the tools that need it
Specifications
- Dimensions
- 17.31” W × 17.31” D × 1.50” H (44 W × 44 D × 3.8 H cm)
- Weight
- 13 lbs (5.89 kg) with no transceivers installed
- Power
- 280 Watts with no transceivers installed
- Thermal load
- 955.40 BTU/hr with no transceivers installed
- Operational temp.
- 32 to 113°F (0 to 45°C)
- Storage temp.
- –40°F to 158°F (–40°C to 70°C)
- Relative humidity
- Operating: 10-85% non-condensing; Storage: 0-95% non-condensing
- LEDs
- Blade Power, Status, Port Link, Tx/Rx activity
Related resources
IntellaView Solution Brief
Monitoring Cisco ACI Fabrics With APCON IntellaView Visibility Solutions
IntellaView 52-Port Multi-Function Blade
Monitor high-speed networks with ease
Monitor high-capacity networks with advanced features. This is the 52-port multi-function blade, a customizable Packet Aggregation switch with 1G / 10G / 25G / 40G / 100G port densities.
Tunnel Initiation & Termination
Network Tunneling is an easy way to transport packets from blind spots or remote sites to the tools that need to see it, regardless of the environment.
- Supports GRE, NVGRE, VXLAN, GENEVE, and ERSPAN I, II, and III protocols.
- Terminate up to 512 individual tunnels (32 per service point).
- Provide up to 200G decapsulation on 16 service points.
Packet Slicing
Packet Slicing on the 36-port multi-function blade can reduce packet volume to prevent tool oversubscription or remove confidential information to comply with regulatory requirements.
- Configurable byte offset.
- Line rates of 1G / 10G / 25G / 40G / 100G.
- Slice on ingress or egress.
Protocol (Header) Stripping
Improve network performance, reduce latency & prevent oversubscription of tools.
- Use performance & security analysis tools regardless of header type.
- VLAN, VLAN Q-in-Q, FabricPath, MPLS, VXLAN, GPRS, GTP, VN-tag & GENEVE support.
- Processing at true line rate with zero latency.
Elevate to the next level.Get high-speed monitoring today.
IntellaView blades
Intellaview
New16-Port 400G Multi-Function
ACI-4130-E16
- 16 QSFP-DD ports of 40G/100G/200G/400G
- Advanced architecture allows all 16 ports to communicate for expanded services like Load Balance Groups
- ACI-4130-E16-2-1 provides packet deduplication of 400G (200G line rate on 2 processors)
Intellaview
28-Port 400G Multi-Function
ACI-4130-E28
- 4 QSFP-DD ports of 40G/100G/200G/400G
- 24 QSFP56 ports of 40G/100G/200G
- Advanced architecture allows all 28 ports to communicate for expanded services like Load Balance Groups
- ACI-4130-E28-2-1 provides Packet Deduplication of 400G (200G line rate on 2 processors)
IntellaView
36-Port Multi-Function
ACI-4030-E36
- 36 x 40G / 100G front panel ports
- Can support 144 10G / 25G ports with breakouts
- Packet deduplication, tunnel initiation & termination, protocol header stripping, and packet slicing
IntellaView
HyperEngine Packet Processor
ACI-4033-E00-1
- Real-time processing across 10G / 40G / 100G feeds, supporting up to 600G total throughput
- Six packet processing service engines that can be run concurrently
- Application filtering, traffic shaping, pattern matching, packet deduplication, and NetFlow record generation
IntellaView
Optical Bypass Tap
ACI-4034
- Detect inline appliance failure in milliseconds
- Automatically bypass security tools with six fail-safe optical bypass TAPs
- Extend 10G tools and older lower-rate appliances
Intellaview
400G EdgeSwitch
ACI-4532-EDG-1
- 32 QSFP-DD Ports x 40G/100G/200G/400G
- High-speed traffic visibility: Monitor the Edge, TAPs, AI data, and tunnels with 400G throughput
- Deploy top-of-rack, end-of-row, or at the network’s edge for advanced processing: ACL Filtering, Load Lalancing, Port Tagging, Tunnel Management, and Trunking to IntellaView
IntellaView
EdgeSwitch
ACI-4432-EDG-1
- Traffic filtering: Pre-filter and send traffic to security tools.
- Traffic aggregation: Aggregate top-of-rack switches, consolidate remote sites, and simplify traffic management for advanced processing
- Port tagging: Gain visibility into where network traffic originates to increase network security, now including ERSPAN-based VLAN tagging